Auotmatic 2D Mask Machinery With Breath ing Valves

Product

Product Name:

Auotmatic 2D Mask Machinery With Breath ing Valves

Detailed Introduction:

More Products

1 to 1 Automatic Foldable Respirator Mask Production Line(Headband)
Youtube Link Youtube Link
FACE MASK MACHINE ASSEMBLE LINE DESIGN LAYOUT
．Face Mask Machine Product Catalog ．Mask production line / Mask production machine ．Medical Surgical Face Mask Making Machine LineIntroduction This kind of medical surgical face mask making machine is the auto equipment which be used to the product of disposable face masks, be suitable for the material of non-woven fabric , activated carbon and filter material from 1~5 layers. This machine is fully automatic plane mask production line, Including automatic material transportation, automatic transportation, cutting off nose bridge, ultrasonic mask edge welding folding, ultrasonic fusion molding cutting、shunt transportation, ear wire cutting and welding. Specification Model EPMM01 SIZE 6500mm(L)☓3500mm(W)☓1900mm（H） Weight <2000Kg，Ground Bearing<500Kg/m2 Power Rated power 9KW Tact time 60Pcs/min Percent of pass 99%(Not contain Incoming materials and misoperation) Features ‧ PLC control, Servo, Automatic. ‧ Photoelectric detection, avoid to reduce materials waste. ‧ Separate model selection for children and adults. ‧ Specification of Semiautomatic Machine of KN95 / N95 Masks ‧ Simple Operation, Low Failure Rate, Enhanced Production Efficiency Slicer Equipment (part drawing) Ultrasonic Ear Wire Equipment (part darwing) Machine Introduction This is a semi-automated production equipment for the production of KN95/N95 masks. It is a combination of 1pcs slicer equipment, 4 pcs semi-automatic ultrasonic ear wire cutting and welding equipment and 4pcs ultrasonic mask edge welding folding equipment. In order to complete the production of the entire product process. The kN95/N95 mask produced by the equipment makes the three-dimensional shape suitable for the face, science of design, suitable for a variety of mouth shape, wear it comfortable, the use of multilayers of filter inlet special material design. Bacterial filtration efficiency over 95%. Masks can be produced in accordance with CN, EU and US standards. Production Future 1. High stability, low failure rate, beautiful appearance without rust.2. Computer PLC programming control, servo drive, high degree of automation.3. Photoelectric detection of raw materials to avoid mistakes and reduce waste.4. Integrated production, advanced servo speed control. One-time welding molding process.5. The daily production capacity of KN95/N95 of one mask machine is over 45,000 PCS (20H).6. Equipment can be designed into different shapes, can be customized design. Key Parameters Specification EPKN95M01 Equipment Dimension 6500(L)*2200(W)*1900mm(H) Weight Light <2000kg, The bearing capacity of the ground<500kg/sqm Power Consumption 14KW Air Pressure 0.5-0.7Mpa, 300L/Min Environment Application Temperature 10-35C, Humidity 35-75%, no combustible corrosive gases and other substances of more than 100,000 class. Capacity 80Pcs/min( Min skilled worker)(Max 100Pcs/min) Operation Worker 8-9 persons Control Method PLC+ Servo Drive+ Pneumatic Drive Control Platform Touch LCD Screen + Key Switch Fold in Half Symmetry +-2mm Failure Rate <2% Delivery Time 15days Percent Pass Product 99% ( not including bad incoming materials improper operation ) Equipment Combination An important component of mask equipment QTY.（SET) Notes Water treatment layer, melt spray cloth, water absorption layer, nose tip shaping tablet 7 Inflatable shaft + clutch. (5 sets) KN95/N95 slicer equipment 1 2 sets of servo motor control KN95/N95 semi-automatic ultrasonic ear wire cutting and welding equipment 4-6 1 set of servo motor drive, 1 set of speed regulating motor drive KN95/N95 ultrasonic mask edge welding folding equipment 4-6 KN95/N95 Mask Material Requirements and Specifications Item Width(mm) Coil’s outside diameter(mm) Cartridge ‘s inside diameter(mm) Weight(Kg) Notes Non-woven fabric(inner layer) 175-185 φ600 φ76.2 Max.20kg 1 layer Non-woven fabric(outside layer) 175-185 φ600 φ76.2 Max.20kg 1 layer Intermediate filter layer 175-185 φ600 φ76.2 Max.20kg 1 -3 layers Nose tip shaping tablet 3-5 φ450 Φ20 Max.30kg 1 roll Masks ear wire 5-8 – φ15 Max.10kg 6 roll Safety Tips for Equipment Operation ‧ Requirements of equipment safety. ‧ The equipment design conforms to the principle of human-machine, convenient operation, safety, and has the overall fixed reliability design. ‧ The equipment must have comprehensive safety measures, especially in the equipment to turn parts, dangerous parts and all hazardous areas are equipped with protective measures, devices and safety signs. Equipment safety, ‧ ‧ environmental protection requirements to meet China’s national standards. ‧ Requirements for electrical safety ‧ The whole machine must have a power switch, gas source of the shut-off valve, to ensure that during maintenance, must close all switches, to avoid the occurrence of dangerous accidents. ‧ The control system platform must be placed in a position that the operator can observe and operate. ‧ The electrical system of the equipment must have leakage protection, overload protection and short circuit protection. ‧ Safety signs must be posted where equipment and electrical appliances are hazardous. Avoid accidents involving hazardous operation of personnel safety and equipment. Eliminate the occurrence of a safety accident. ．One drag two plane mask machine technical specification Introduction Equipment overview:This machine is mainly used for automatic forming of flat children’s masks: after unwinding the entire roll of fabric, it is driven by a roller, and the fabric is automatically folded and wrapped; the nose beam is pulled by the whole roll, unrolled, and cut into a fixed length and then imported into the wrapped fabric. The two sides are ultrasonically welded to the seal, and then the ultrasonic lateral seal is cut and formed by the cutter; the mask is sent to the two mask ear strap welding stations through the assembly line, and the final mask is formed by ultrasonic welding; when the mask is made, Transported to the flat belt line through the assembly line to collect. Device model: JD-1490 Equipment installation and configuration requirements 1. Equipment size: 6670mm (L) × 3510mm (W) × 1800mm (H);2. Appearance color: International standard warm gray 1C (standard color), according to this standard when no special instructions;3. Equipment weight: ≤2000kg, ground bearing ≤500KG / m2;4. Working power supply: rated power about 15KW;5. Compressed air: 0.5 ～ 0.7 MPa, the flow rate is about 300L / min;6. Operating environment: temperature 10 ～ 35 ℃, humidity 5-35% HR, no flammable, corrosive gas, no dust (cleanness not less than 100,000).7. Operator: 1-3 people
N95-Automatic-Mask-Making-Machine
Company Details : Offering an array of Ribbon Slitting Machine, Carbon Ribbon Slitting Machine, TTR Slitter, Core Cutter, Barcode Ribbon, etc. which are known for their reliable performances. Xiamen Delish Automation Equipment Co., Ltd. is a China-based leading Thermal Transfer Ribbon Slitting Machine Manufacturer & Exporter, and has reinforced its engineering capability and skill in order to get into international markets with wider presence and greater agility. The company was founded in 2010 with the aim of bolstering slitting technology as well as enhancing inter-team collaboration and coordination for higher throughput. Why Us? Impeccable Products Authorized Vendor Base BUSINESS TYPE Exporter, Manufacturer, Supplier ESTABLISHMENT 2010 WORKING DAYS Monday To Sunday Product Image : Explore Related Categories Loading machineryFeed unitFlotation machineBlast room systemSheeting machineSaw sharpenersCommercial laundry machineWhite coal machineTape rolling machineAirless shot blasting machineShade net machinePipe shot blasting machine
mask-ear-loop-welding-machine
Minimum Order Quantity 1 one Brand RV MACHINE TOOLS Production Capacity 30-40 pcs/min Power 6 kw/440v Machine Type Automatic Model Name/Number Automatic ear loop welding machine Size (L*B*H) 2500 mm 1500mm x 2000 mm Usage/Application surgical mask Additional Information: Delivery Time: 8 weeks Packaging Details: wooden packing
fully-automatic-surgical-mask-making-machine
Product Details: Minimum Order Quantity 1 one Brand RV MACHINE TOOLS Production Capacity 80-100 Nos /Min Power 10KW/440V. /. Air 6Kg cm2 Machine Type Automatic Size (L*B*H) 3000 * 2500 *2000 MM Usage/Application SURGICAL MASK Fully automatic surgical mask making machine (Single line) Specification capacity 60-80pcs/min Mask size 17.5 cm x 9.5 cm power 10 kw/440v +-5v ,50Hz +-1 Hz Air 6kgcm2 Machine weight 1800 kg Dimensions L x B x H 3000 X 2500 X 2000 in mm
3-ply-surgical-fully-automatic-mask-making-machine
Brand RV MACHINE TOOLS Production Capacity 80-100 Nos/min Power 12 kw/440v Machine Type Automatic Model Name/Number FULLY AUTOMATIC SURGICAL MASK MAKING MACHINE
Full Rrange of Products in Mask Machines, such as Surgical Masks, Foldable Respirator Masks
(N95 Masks) & Cup Masks. Etc., Below, Please find our videos to know more of our products. 1.High Speed Surgical Mask Machine. https://youtu.be/nJQ3fXsF-wY Surgical Mask Machines https://youtu.be/qgTqCOPwP4I 2.KN95/N95 Foldable Respirator Mask Machines(Headloop or Earloop Type, With or Without Breathing Valve ) https://youtu.be/tJWxcHYDECI https://youtu.be/qCF1ip1zPfU 3.Cup Mask Machines.(Welding Headloop or Staple Headloop Type, With or Without Breathing Valve,With or Without Preforming Station) https://youtu.be/AQwDPEI9XBM https://youtu.be/M3wVeHWw2G8